Borotron™ HM015 shapes are made from high molecular weight polyethylene that is enhanced with 1.5% elemental boron. The boron enhancement makes this grade suitable for use in medical and nuclear shielding applications. The high hydrogen content of HMW-PE allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ HM015 HMW-PE components are prevalent in nuclear and medical technology.
PROPERTIES
Enhanced with 1.5% elemental boron
Very good wear and abrasion resistance
High impact strength
Excellent chemical resistance
Low coefficient of friction
Very low water absorption
Excellent machinability
Thermal Properties
Property
Value
Heat Deflection Temperature at 1.8MPa (264 psi) (ºC)
45
Continuous allowable service temperature in air
80
Mechanical Properties
Property
Value
Tensile Strength (MPa)
25
Tensile Modulus of Elasticity (MPa)
1,500
Compressive stress at 1% nominal strain (MPa)
13
Compressive stress at 2% nominal strain (MPa)
20
Compressive stress at 5% nominal strain (MPa)
28
Flexural Strength (MPa)
Charpy Impact Notched (kJ/m²)
7C
Chemical Properties
Property
Value
Hot Water / Steam
Limited
Acids, Weak
Acceptable
Acids, Strong (pH 1-3)
Not acceptable
Alkalies, Weak
Acceptable
Alkalies, Strong (pH 11-14)
Not acceptable
Hydrocarbons - Aromatic
Acceptable
Hydrocarbons - Aliphatic
Acceptable
Ketones, Esters
Acceptable
Chlorinated Solvents
Limited
Alcohols
Acceptable
Inorganic Salt Solutions
Acceptable
Electrical Properties
Property
Value
Dielectric Strength (kV/mm)
Certification Properties
Property
Value
FDA
Not compliant
European Food Approval
Not compliant
NSF
Not compliant
3A-SSI
Not compliant
Canada AG
USDA
Not compliant
Flammability (UL Rating)
HB
Medical use
NUCLEAR - Shielding portfolio
Miscellaneous Properties
Property
Value
Base Material
HMW-PE
Brand Family
Colors
Natural Natural (white)
Density (g/cm3)
0.99
Water Absorption after 24 hrs immersion in water (%)
