TIVAR™ ESD UHMW-PE/TIVAR™ Antistatic UHMW-PE
TIVAR™ ESD UHMW-PE/TIVAR™ Antistatic UHMW-PE

TIVAR™ ESD UHMW-PE/TIVAR™ Antistatik UHMW-PE

Whatsapp:+86 151 9032 3888
E-Mail:lucky@novaplas.cn

Einzelheiten

TIVAR™ ESD/TIVAR™ Antistatic UHMW-PE electrostatic dissipative, carbon-filled shapes protect against electrical charge build-up on wear surfaces. In addition to these characteristics, TIVAR™ ESD/TIVAR™ Antistatic UHMW-PE components exhibit excellent corrosion resistance and zero moisture absorption in robotic and conveyor equipment parts that are especially sensitive to electrical charge build-up. For these reasons, this TIVAR™ grade is often favored as a solution in chain guides, chute liners, guide rails, wear stripe, transfer plates, bearings and assembly conveyor components.

EIGENSCHAFTEN

  • Protects against electrical charge build-up
  • Reduces noise
  • Self-lubricating
  • Corrosion-resistant
  • No moisture absorption
Thermische Eigenschaften

MetricImperial

EigentumWert
Wärmeverformung Temperatur bei 1,8MPa (264 psi) (ºC)42
Dauernd zulässige Betriebstemperatur in Luft80

Mechanische Eigenschaften
EigentumWert
Zugfestigkeit (MPa)20
Zug-Elastizitätsmodul (MPa)790
Druckspannung bei 1% Nenndehnung (MPa)7
Druckspannung bei 2% Nenndehnung (MPa)11
Druckspannung bei 5% Nenndehnung (MPa)17.5
Biegefestigkeit (MPa)18
Charpy-Kerbschlagzähigkeit (kJ/m²)110P

Chemische Eigenschaften
EigentumWert
Heißwasser/DampfBegrenzt
Säuren, schwacheAnnehmbar
Säuren, stark (pH 1-3)Annehmbar
Alkalien, SchwacheAnnehmbar
Alkalien, stark (pH 11-14)Annehmbar
Kohlenwasserstoffe - aromatischAnnehmbar
Kohlenwasserstoffe - AliphatischeAnnehmbar
Ketone, EsterAnnehmbar
Chlorierte LösungsmittelAnnehmbar
AlkoholeAnnehmbar
Anorganische SalzlösungenAnnehmbar

Elektrische Eigenschaften
EigentumWert
Durchschlagfestigkeit (kV/mm)

Eigenschaften der Zertifizierung
EigentumWert
FDANicht konform
Europäische LebensmittelzulassungNicht konform
NSFNicht konform
3A-SSINicht konform
Kanada AG
USDANicht konform
Entflammbarkeit (UL-Bewertung)HB
Medizinische VerwendungSEMICON - ESd materials

Verschiedene Eigenschaften
EigentumWert
GrundmaterialUHMW-PE
Marke Familie
FarbenBlack
Dichte (g/cm3)0.94
Wasserabsorption nach 24 Stunden Eintauchen in Wasser (%)0.1
Wasserabsorption bei Sättigung in Wasser (%)0.1
Abnutzungsfaktor (µm/km)8
Verfügbare FormenPlate Rod
Hauptverwendungszweck tragend und/oder strukturellBearing Structural