TIVAR™ Arctic UHMW-PE is a modified, revolutionary lining material based on an extremely high molecular weight PE matrix. While subzero temperatures can cause bulk materials to freeze to traditional UHMW-PE liners, TIVAR™ Arctic exhibits great release properties even below -15°C (5°F).
Developed especially for use in the coldest regions on earth where temperatures can drop to -50°C (-58°F), its unique and innovative formulation is based on active fillers that makes TIVAR™ Arctic UHMW-PE very effective when used at freezing temperatures. Field tested in Siberia, TIVAR™ Arctic UHMW-PE could give a very short payback time for your investment. The product is Patent Pending.
PROPERTIES
Great release properties even below -15°C (5°F)
Extremely high molecular weight PE matrix
Active fillers prevent bulk materials freezing to liner
Thermal Properties
Property
Value
Heat Deflection Temperature at 1.8MPa (264 psi) (ºC)
37
Continuous allowable service temperature in air
80
Flammability (UL Rating)
HB
Mechanical Properties
Property
Value
Tensile Strength (MPa)
15
Tensile Modulus of Elasticity (MPa)
484
Compressive stress at 1% nominal strain (MPa)
4.5
Compressive stress at 2% nominal strain (MPa)
7.5
Compressive stress at 5% nominal strain (MPa)
12
Flexural Strength (MPa)
13
Charpy Impact Notched (kJ/m²)
34P
Chemical Properties
Property
Value
Hot Water / Steam
Limited
Acids, Weak
Acceptable
Acids, Strong (pH 1-3)
Acceptable
Alkalies, Weak
Acceptable
Alkalies, Strong (pH 11-14)
Acceptable
Hydrocarbons - Aromatic
Acceptable
Hydrocarbons - Aliphatic
Acceptable
Ketones, Esters
Acceptable
Chlorinated Solvents
Acceptable
Alcohols
Acceptable
Inorganic Salt Solutions
Acceptable
Electrical Properties
Property
Value
Dielectric Strength (kV/mm)
Industry Specific Usage (FOOD)
Property
Value
FDA
Not compliant
EU
Not compliant
USDA
Not compliant
3A-SSI
Not compliant
VMX materials
Not compliant
Industry Specific Usage (MEDICAL)
Property
Value
ISO 10993-5 and USP <87>
Not compliant
ISO 10993-10 Sensitization
Not compliant
ISO 10993-10 (Intracutaneous Reactivity) and USP <88>
Not compliant
ISO 10993-11 and USP <88>
Not compliant
USP <88> (Implant)
Not compliant
ISO-10993-4
Not compliant
USP <661>
Not compliant
USP Class VI
Not compliant
AFO - Animal Free Origin
Not compliant
Industry Specific Usage (RECYCLED)
Property
Value
Statera™ portfolio
Not compliant
Industry Specific Usage (NUCLEAR)
Property
Value
Shielding Portfolio
Not compliant
PMUC certified
Not compliant
Industry Specific Usage (SEMICON)
Property
Value
ESd materials
Not compliant
Conductive materials
Not compliant
Miscellaneous Properties
Property
Value
Base Material
UHMW-PE
Brand Family
Colors
Khaki-Grey Blue
Density (g/cm3)
0.98
Water Absorption after 24 hrs immersion in water (%)
