Ketron™ TX is an internally lubricated grade of PEEK. This premium grade offers improved wear and frictional performance over virgin PEEK. Often favored for applications where extreme performance temperatures, critical tolerances, or frictional heat are required, Ketron™ TX PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.
PROPERTIES
Internally lubricated for reduced friction
Resistant to extreme temperatures and frictional heat
Suitable for applications with critical tolerances
Thermal Properties
Property
Value
Heat Deflection Temperature at 1.8MPa (264 psi) (ºC)
155
Continuous allowable service temperature in air
Mechanical Properties
Property
Value
Tensile Strength (MPa)
90
Tensile Modulus of Elasticity (MPa)
3,750
Compressive stress at 1% nominal strain (MPa)
31
Compressive stress at 2% nominal strain (MPa)
61
Compressive stress at 5% nominal strain (MPa)
120
Flexural Strength (MPa)
Charpy Impact Notched (kJ/m²)
3.0
Chemical Properties
Property
Value
Hot Water / Steam
Acceptable
Acids, Weak
Acceptable
Acids, Strong (pH 1-3)
Limited
Alkalies, Weak
Acceptable
Alkalies, Strong (pH 11-14)
Acceptable
Hydrocarbons - Aromatic
Acceptable
Hydrocarbons - Aliphatic
Acceptable
Ketones, Esters
Acceptable
Chlorinated Solvents
Acceptable
Alcohols
Acceptable
Inorganic Salt Solutions
Acceptable
Electrical Properties
Property
Value
Dielectric Strength (kV/mm)
22
Certification Properties
Property
Value
FDA
Compliant
European Food Approval
Not compliant
NSF
Not compliant
3A-SSI
Not compliant
Canada AG
USDA
Compliant
Flammability (UL Rating)
V-0
Medical use
FOOD - USDA FOOD - FDA
Miscellaneous Properties
Property
Value
Base Material
PEEK
Brand Family
Colors
Blue
Density (g/cm3)
1.39
Water Absorption after 24 hrs immersion in water (%)
