Nylatron™ GS PA66 AE, is a Molybdenum Disulphide (MoS2) filled nylon that offers outstanding strength and rigidity, as well as a lower coefficient of linear thermal expansion compared to other nylon products. Even with prolonged exposures to high temperature, Nylatron™ GS PA66 AE components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade can be found as bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the aerospace industry, as well as in construction and heavy equipment.
PROPERTIES
Outstanding mechanical strength and rigidity
Low coefficient of linear thermal expansion
Dimensionally stable to maintain fits and clearances
Resolves issues with seizing bearings
Thermal Properties
Property
Value
Heat Deflection Temperature at 1.8MPa (264 psi) (ºC)
85
Continuous allowable service temperature in air
80
Mechanical Properties
Property
Value
Tensile Strength (MPa)
95
Tensile Modulus of Elasticity (MPa)
3,600
Compressive stress at 1% nominal strain (MPa)
32
Compressive stress at 2% nominal strain (MPa)
62
Compressive stress at 5% nominal strain (MPa)
100
Flexural Strength (MPa)
128
Charpy Impact Notched (kJ/m²)
4.0
Chemical Properties
Property
Value
Hot Water / Steam
Limited
Acids, Weak
Limited
Acids, Strong (pH 1-3)
Not acceptable
Alkalies, Weak
Limited
Alkalies, Strong (pH 11-14)
Not acceptable
Hydrocarbons - Aromatic
Acceptable
Hydrocarbons - Aliphatic
Acceptable
Ketones, Esters
Acceptable
Chlorinated Solvents
Limited
Alcohols
Limited
Inorganic Salt Solutions
Acceptable
Electrical Properties
Property
Value
Dielectric Strength (kV/mm)
26
Certification Properties
Property
Value
FDA
Not compliant
European Food Approval
Not compliant
NSF
Not compliant
3A-SSI
Not compliant
Canada AG
USDA
Not compliant
Flammability (UL Rating)
HB
Medical use
Miscellaneous Properties
Property
Value
Base Material
PA66
Brand Family
Colors
Dark Grey
Density (g/cm3)
1.15
Water Absorption after 24 hrs immersion in water (%)
